Paul's RV-9A one-day log view
8/17/2004
4 hours: Cabin frame...or just call it the roll barI trimmed the deck like I was supposed to do a while ago. I didn't de-rivet it at all, just hacksawed (slowly) in place. Came out fine.
After a lot more fiddling, I finally drilled the center plate on the roll bar.
The first of the two strips (blue) to hold the two halves together. They don't really fit well inside the channel because the walls of the channel are not square in the bent area. So keeping the strip tight against the wall and pressed to the bottom is impossible to do all at once. I just got it as close as I could.
